Specialized

When you ride in frigid conditions, your options for lightweight insulation under your outerwear are limited. It's typically been a fleece jersey with rear pockets that only adds to bulk and weight. Insulation with a high warmth-to-weight ratio, like down feathers or polyester fiber-fill are ideal, but those materials need to be encapsulated with a coated fabric to contain them, cutting breathability down significantly. Our solution is Polartec Alpha insulation that provides insulation without the need to encapsulate, giving you unimpeded breathability for a warm, dry ride. The outer shell is lightweight and uncoated, furthering the flow of perspiration and allowing the piece to packable when you need to de-layer when things get too hot. The jacket is designed to be worn under an outer jacket, such as our Deflect H2O pieces, so the fit is close to the body to eliminate any bulk. An under-the-helmet hood provides an added wind layer and traps heat in where you lose it, at the top of your head, and we finish off the neck and wrists with reflective binding for visibility in case you're caught out after sundown. - Woven outer shell with 90g Polartec Alpha breathable insulation combines to create a packable and warming insulation piece. - A non-insulated hood is intended to be used under the helmet to keep the wind at bay and to trap heat on cold rides. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Inside pockets are perfect to store a hat or gloves when things start to heat up. - Edge binding at the wrists and collar seal in warmth and feature reflective tape woven-in for increased visibility to motorists in low-light conditions. - Deflect UV 50+ protects against harmful UV rays. - The fit is close to the body for layering under outerwear. For a looser, "street fit," we recommend one size up. - Shell fabric weight: 48g

While finding the perfect jacket at either end of the temperature spectrum is pretty easy, the temperature range in between is where you'll spend the majority of your time on the road—and that's where the RBX Softshell Jacket shines. It's stretchy, wind- and water-resistant, and is sure to keep you warm in the Shoulder Season. - Fabric Content: FRONT: 88% Polyester, 12% Polyurethane; OTHER: 84% Polyamide, 16% Elastane - Three back pockets help to secure all your ride needs, right where you want them.

Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. - Super slick, patent pending, spindle design - Super low-profile design; 10mm thickness at center - Custom undercut pins provide “clip in” style grip and easy removal - Pedal body carriers 4 hidden pins for easy replacement of broken pins - Tapered outside pedal edge for maximum grip and ground clearance - Large foot platform for modern day DH, 110x108mm

The Sitero Expert Gel adds an extra layer of comfort to the Sitero shape, making it the perfect option for long distance rides in an aerodynamic position. And to further ensure strength and durability, it features hollow titanium rails and SWAT mounts for seat bag storage options. - Next level comfort for riders of all sizes while in the aero position. - Lightweight and supportive PU padding for comfort and support on longer rides. - Durable and lightweight hollow titanium rails. - High-frequency, welded cover material for secure hold and a smooth pedal stroke. - Integrated Direct Mount Reserve Rack included for bottle/equipment storage solutions. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 240g

Getting caught in the rain is one thing, but starting your day in lousy conditions is a whole other story. For when mother nature decides to rain on your ride, grab the RBX Comp Rain Jacket. Its waterproof shell and 4-way stretch will keep you warm and comfortable in even the nastiest conditions. - Waterproof Shell has 4-Way Mechanical Stretch built into the knit, allowing the jacket to fit and feel comfortable on your body, on and off the bike. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Three back pockets help to secure all your ride needs, right where you want them.

A thermal jersey is a key component to winter riding, and the SL Expert Thermal Jersey is no exception. With special thermal fabrics, it's not only extremely warm, but also lightweight, stretchy, and downright comfy. - Thermal fabrics feature remarkable insulating properties, astounding levels of breathability and moisture management, and a lightweight, brushed back fleece that's soft against the skin. - Three back expansion pockets provide plenty of storage for your ride essentials and electronics. - Fabric Content: MAIN 94% Polyester, 6% Elastane - OTHER: 85% Nylon, 15% Spandex

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

The Phenom Expert is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction at the shell, along with Specialized's Adaptive Edge base that allows the outer edge to conform to your body for a near-custom fit. This version, unlike the Pro, has rugged titanium rails for lightweight durability, and like the Pro, it has a medium density, Level Two Padding for ample support and comfort. Likewise, at the tail, you'll find the Phenom hallmarks of a rounded, anti-snag design, and throughout the saddle, an expertly tuned construction that provides the ideal degree of both stiffness and efficiency. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Lightweight and tough, hollow titanium rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 248g - Size 155mm / Weight 254g

Specialized's ultra-light Power Expert saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff, carbon-reinforced shell for longevity and all-day riding efficiency - Lightweight and supportive PU padding for comfort and support on longer rides - Lightweight and durable hollow titanium rails - Tough, light and water-resistant cover - Level 2 padding: Medium density foam; bike feel with additional cushioning - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Size 130mm / Weight 230g - Size 143mm / Weight 233g - Size 155mm / Weight 235g - Size 168mm / Weight 238g

The Specialized Power Arc Expert saddle expands on the success of the original Power saddle. It features the same channel, length, and hollow titanium rails as the original and Pro Arc, but where it differs is in its shell and padding. But this means that it still features a stiff composite shell and supple, Level 2 PU padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. Specialized even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Lightweight and supportive PU padding for comfort and support on longer rides. - Lightweight, durable, and hollow titanium rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 233g - Size 155mm / Weight: 235g - Size 168mm / Weight: 238g

Not all chainrings are created equal, and if you need proof of this, look no further than these chainrings that Praxis made exclusively for Specialized. - Custom design Praxis rings For Specialized only - Cold-forged, Heat-treated, and hard anodize 7075 T6 Aluminum - Compatible with Campagnolo, Shimano, and SRAM 10-/11-speed cranksets

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Approximate weight: 365g (1/2 pair, Size 42)

The HyperViz Collection is the solution to 24-hour visibility. We combine Hyper Green (the most visible color on the light spectrum) with motion-activated reflectivity, colors, and patterns to drastically increase your visibility to motorists in all conditions. We’ve added this to the perfect pair of bib shorts, and from here on out, you'll wish all of the bib shorts you race in would disappear beneath you like the new SL bib shorts. This unmatched comfort comes, in part, from our custom, pre-molded 3D Chamois. Not only is it pre-molded to the shape of your body and saddle to reduce wrinkles and pressure points, but it also features multi-density foam that ensures the utmost in comfort. The other half of the comfort equation comes from the fabrics and the fit. For example, the welded uppers get rid of seams altogether for the most comfortable straps possible, while an articulated design ensures the perfect fit when in the riding position. - Contrasting Hyper Green and Black colors are paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - Welded bib upper construction reduces friction and dials-in the fit by reducing the need for seams. The bib upper fabric, meanwhile, - incorporates a carbon yarn for anti-microbial and thermal regulation properties. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Triple-density-foam Performance Body Geometry Contour 3D Chamois is pre-molded to match the shape of the body for exceptional comfort. - Slim Fit feels like a second skin. - 11" inseam (size Medium)

The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting

Cold legs make for bad rides, and bad rides are no fun. Lucky for you, the RBX Comp Thermal Bib Tights keep your legs toasty on chilly days. And to top off the comfort, we've used our Body Geometry 3D Contour Chamois with a variable density design that places support and padding where you need it, not where you don't. - Fabric Content: TIGHT: 84% Polyamide, 16% Elastane; UPPER: 75% Polyamide, 25% Elastane - Made of soft and water-resistant Lombardia fleece, which stretches in two directions for comfort and easy care.

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Comp saddle, with its hollow Cr-Mo rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 220g

The Specialized Phenom Comp is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction, Cr-Mo rails, and SWAT mounts for the utmost in utility. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Light and super-durable, hollow Cr-Mo rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 254g - Size 155mm / Weight 260g

Specialized's lightweight Power Comp saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. • Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries • Stiff, carbon-reinforced shell for longevity and all-day riding efficiency • Lightweight and supportive PU padding for comfort and support on longer rides • Lightweight and super-durable hollow Cr-Mo rails • Tough, light and water resistant cover • Level 2 padding: Medium density foam; bike feel with additional cushioning • SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions

This race-inspired design is known for its incredible fit and tremendous value. It has many similar features to the S-Works Prevail, like the Tri-Fix webbing system and 4th Dimension Cooling, granting the Propero III incredible performance at a more attainable price. - MIPS-equipped. - Easy-adjust, HairPort FSL II fit system with four height positions and micro-adjustable dial. - 4th Dimension Cooling System with Mega Mouthport for enhanced comfort. - Composite matrix internal reinforcement allows larger vents for greater cooling. - Soft 4X DryLite webbing material won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

Upgrade to Specialized's Romin Evo Comp Gel Saddle and enjoy comfort like never before. Its extended cutout, Body Geometry ergonomics and lightweight padding with gel all ensure that no matter how far you ride, you'll feel great. Plus, the Romin boasts hollow-chromoly rails and a durable, water-resistant Micromatrix top. And, it's available in 3 widths for a perfect fit.

For the times when the weather doesn't want to cooperate with the forecast, we've developed the Trail SWAT Jacket. It features a breathable, wind-resistant fabric with a DWR water-repellant coating. Unlike many of our other SWAT products, this jacket doesn't house a myriad of pockets. Instead, it has one, making it easy to fit into any pocket, pack, or bike equipped with SWAT. - Minimal bulk and a built-in pocket helps it fit into any pocket, pack, or bike equipped with SWAT. - Abrasion panels are designed to protect the jacket through the toughest trail conditions. - Under helmet integrated scuba hood with fixed elastic binding creates added protection with the perfect fit.

The Race-Series Wind Jacket excels on blustery-cold days. With a 100% Recycled Polyester Wind Shell, this jacket keeps wind from chilling your bones, all while being packable enough to throw in a pocket while you head up the next ascent. Top if off with our HyprViz color and reflectivity treatments that increase your visibility to motorists, and you're left with a versatile option for a variety of conditions. - 100% Recycled Polyester Wind Shell provides a sustainable solution to wind resistance on any ride. - Back mesh panel allows for maximum ventilation as your body builds up heat and energy inside the jacket. - Fabric Content: MAIN: 100% Polyester Woven; BACK: 82% Nylon, 18% Spandex Knit Mesh - Hyper Green and Black are paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Lightweight fabric and minimal construction allow the jacket to be packed into your jersey pocket when it isn't needed. - Protective front panels keep the wind from permeating into your ride, keeping you comfortable even on the steepest of descents. - Slim Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort, while still allowing room for a jersey or base layer underneath.

Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.

Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build. - Compatible with Tarmac integrated cockpit. - Integrated face-plate computer mount. - 80-140mm length options. - 6 and 12 degree rise options. - Approx. weight: 155g (100mm)

Depending on where you ride, you might wear a heavy-duty jacket a few times a year, but a long sleeve jersey like our RBX Expert Long Sleeve Thermal Jersey has the potential to be worn on every ride. It's designed to both insulate and manage moisture buildup, keeping you cozy. - Thermal fabrics feature remarkable insulating properties, astounding levels of breathability and moisture management, and a lightweight, brushed back fleece that's soft against the skin. - Three back expansion pockets provide plenty of storage for your ride essentials and electronics. - Fabric Content: MAIN 94% Polyester, 6% Elastane - OTHER: 85% Nylon, 15% Spandex

A gilet is arguable the most versatile piece of cycling clothing, perfect for cool mornings, fast descents, and varying temperatures, and the RACE-SERIES Wind Gilet is no exception. Made from 100% Recycled Polyester, it keeps you warm, but not overheated, and packs down to nearly nothing. Top if off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - 100% Recycled Polyester Wind Shell provides a sustainable solution to wind resistance on any ride. - Back mesh panel allows for maximum ventilation as your body builds up heat and energy inside the jacket. - Fabric Content: MAIN: 100% Polyester Woven; BACK: 82% Nylon, 18% Spandex Knit Mesh - Hyper Green and Black are paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Lightweight fabric and minimal construction allow the jacket to be packed into your jersey pocket when it isn't needed. - Protective front panels keep the wind from permeating into your ride, keeping you comfortable even on the steepest of descents. - Slim Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort, while still allowing room for a jersey or baselayer underneath.

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Loosely based upon the leather "hairnets" that cyclists used to wear before protection was a priority, we took their ventilation and classic style and incorporated them into a modern helmet design that combines aerodynamics, weight, aesthetics, and ventilation—the Airnet with MIPS. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Ultra-light Mindset micro-dial fit system with height adjustability for the perfect fit. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Composite matrix internal reinforcement allows larger vents for enhanced cooling. - drirelease® Merino wool pads for increased comfort and sweat/ temperature management. - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Reflective decals for increased visibility in low-light conditions. - MIPS-equipped.

It's All in Your Tactic. With an unprecedented combination of fit, ventilation, and confidence for trail and enduro riding, the Tactic helmet delivers exceptional coverage and seamless integration with goggles or glasses. - Tune a more precise, personalized fit thanks to Tactic's slim, incredibly adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - Integrated fixed visor provides increased trail vision and a seamless interface with eyewear. Specifically designed eyewear channels always give you a spot to store your glasses at a moment's notice. - 380 grams (medium) of lightweight performance. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Whether you're riding acoustic or e-MTB, the Tactic passes the e-bike Standard NTA8776 so you can can send it with confidence on whatever bike choice you make. - The Tactic earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Fitted with a MIPS Evolve solution to provide 10 to 15 millimeters of rotation in every direction. - Integrated fit system allows for extended (occipital) coverage. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. Sizing: - Small = 51 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper conforms to the foot and is built to last. - Cushioned EVA foam midsole for comfort - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 367g (1/2 pair, Size 42)

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.

Cold legs make for bad rides, and bad rides are no fun. Lucky for you, the RBX Comp Thermal Bib Knickers keep your legs toasty on chilly days. And to top off the comfort, we've used our Body Geometry 3D Contour Chamois with a variable density design that places support and padding where you need it, not where you don't. - 17" inseam (size Medium) - Fabric Content: TIGHT: 84% Polyamide, 16% Elastane; UPPER: 75% Polyamide, 25% Elastane - Made of soft and resistant Lombardia fleece, which stretches in two directions for comfort and easy care.

The most advanced piece of technology on your bike is the one attached to your shoulders. That's why the new Mode helmet is designed to fit just right and keep you feeling, and looking cool. Its clean, elegant lines deliver more than modern style, and they integrate hidden vents for increased airflow, so you stay cool even when the temps rise. A seamlessly integrated fit adjustment system and personalized sizing lets you create a fit that's, well, dialed. Take on the city, head on, with Mode. - Hidden vent integration helps cool you off when the heat is on. - MIPS-equipped and ANGi ready. - Mode earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Reflective decals and Stix Light compatibility makes for seamless day and nighttime visibility. - The integrated fit adjustment system delivers a personalized fit and occipital base adjustment. - Whether you're riding acoustic or electric, Mode passes the Dutch e-bike Standard NTA8776 so you can can ride with confidence.

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush, the lightest and most ventilated extended coverage helmet available. We've teamed up with MIPS researchers to introduce MIPS SL—a new, ultra-light, and supremely comfortable version of MIPS that's available exclusively on Specialized helmets. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist "watchband" attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. Starting with protection, the Ambush boasts a significant amount of extended coverage, Energy Optimized Multi-Density EPS foam that manages the energy from impacts effectively, and a Aramid-Reinforced Skeleton that provides extra structure for the foam. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. With its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly tinkering. The Ambush also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Patented aramid-reinforced skeleton provides internal EPS support. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling System with massive vents, internal Cross-Channels, and aligned exhaust ports increases airflow to keep you cool. - Low profile in-molded shell with smooth, snag-free exterior shape. - Extended coverage for added protection and durability. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location. - Lightweight, quick-drying liner features a Gutter Action Brow that channels moisture away from eyes. - Tri-Fix web splitter for improved comfort and ease of strap adjustments.

Typically, this packable vest category has been dominated by lightweight ripstop fabric pieces that provide good wind and spray resistance, but a whole lot of flapping and noise. Our goal was to give you everything you need, without sounding like a flag in a breeze. We engineered a stretch fabric that conforms to your body, providing a soundless ride, while providing wind resistance. To resist spray, we treat the front panel fabric with a durable water repellant coating, while leaving the back panel fabric untreated to increase breathability. The vest balls up into a fist size ball. - Deflect is a lightweight stretch woven fabric that's wind-resistant, water-resistant, and highly breathable. - Lightweight fabric and minimal construction allow vest to be packed into your jersey pocket when it isn't needed. - Full-length front zipper allows for easy ventilation when your efforts heat up. - Partial elastic at the waist and shoulders seal out the cold. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort, while still allowing room for a jersey or base layer underneath - Fabric weight: 49g

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

Specialized's S-Works Turbo Tubular Allround 2 is the tire of choice for many professional riders due to its enhanced performance traits over current offerings. It features an extremely low level of rolling resistance, superior cornering traction, and astounding grip through various course conditions. In other words, it's the tire that's purpose-built to help riders get to the finish line first. - Casing: 290 TPI - Latex Inner Tube - Compound: Gripton - Flat Protection: BlackBelt

Premium features, certified protection, and sleek styling make the Chamonix a tremendous value for any cyclist. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - One-size system, designed for an easy and accurate fit to a wide range of head sizes - Headset SX fit system with micro-adjustable dial for an easy, secure, and accurate fit - 4th Dimension Cooling System optimizes ventilation - In-molded shell improves strength and reduces weight - Tri-Fix web splitter for improved comfort and ease of strap adjustments - Reflective webbing and decals for increased visibility to motorists in low-light conditions - Patented clip-on visor included - MIPS-equipped - Fit system is ANGi crash sensor ready

When it comes to choosing the perfect pair of bib shorts, comfort is everything. And for anyone whose rides demand premium materials, superior fit, and cutting-edge technologies, the new RBX bib shorts are sure to be your jam. We designed an open suspender fit and bib construction that's engineered to keep the shorts up and in-place without constricting the upper body. The stretchy elastic suspenders are uber plush and soft against the skin, and accommodate taller torso lengths with ease. A non-stretch, sail cloth center back panel is laser-cut for breathability and anchors the back of the shorts for added stability. Silicone-infused fabric cuffs, meanwhile, provide a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. Our new Body Geometry Contour chamois also adds unrivaled comfort by minimizing its total footprint and keeping only what's structurally necessary. This minimizes pressure on nerves and soft tissue, while also maintaining the optimal level of support. - Soft and supportive four-way stretch fabric provides ample comfort and a soft hand. - Soft mesh bib uppers with binding provide a comfortable hold. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Single-density-foam Body Geometry Contour Chamois is pre-molded to match the shape of the body for exceptional comfort. - Slim Fit with a 10.5" inseam.

The all-new S-Works Turbo RapidAir is our ultimate race day tire. The most efficient, lightest, best handling, and durable tubeless tire we’ve ever made. The original RapidAir is the tire that broke the World Tour’s addiction to tubulars with Tour de France stage wins, Green Jerseys, and Monument victories. Coaxing more speed and a longer life from our fastest race-day tubeless tire was no easy feat. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 26mm, psi 70-110, approximate weight 230g

Day or night, the Centro LED helmet proves itself to be more than just your average around-town helmet. It features an integrated LED taillight in order to increase your visibility, an easy-to-use, one-size-fits-all system, an in-molded shell for lightweight protection, and all around reflective webbing to help increase your visibility to motorists in low-light conditions. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - Integrated LED tail light for increased visibility in both bright and low-light conditions. - Headset SX fit system with micro-adjustable dial for an easy, secure, and accurate fit. - 4th Dimension Cooling System optimizes ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - All around reflective webbing and decals for increased visibility to motorists in low-light conditions. - Patented clip-on visor included. - Lock-compatible rear vent accepts both cable and U-locks to deter theft. - MIPS-equipped. - Fit system is ANGi crash sensor ready.

Our Seamless Baselayers utilize synthetic yarns to pull moisture away from your body and evaporate quickly to keep a consistent core temperature. Pair that with seamless construction, and it's comfort taken to another level. - Fabric Content: 58% Polypropylene, 37% Polyamide, 5% Elastane - Synthetic yarns are blended to have a soft feel and move moisture away from the skin all while providing the perfect amount of compression.

There's no two ways around it—when it's hot, it's hot. Likewise, there's no better way to beat the heat than by getting the sleeves off, which is why Specialized created the Women's RBX Comp Sleeveless Jersey. It's made from their VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that they included a full-length front zipper for on-the-fly venting, as well as their Standard Fit that's tailored specifically for women. This cut is in the sweet spot between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. There are also two rear expansion pockets and a sweatproof pocket to house all of your small ride essentials, plus Deflect UV 50+ treatment to help protect your skin from harmful ultraviolet rays. - VaporRize knit fabrics are used throughout to provide muscle support and accelerated moisture transfer. - Two rear expansion and one sweatproof pocket supply you with ample room to securely house your small ride essentials and electronics. - Full-length zipper gives you an added layer of ventilation when your efforts heat up. - Deflect UV 50+ protects your skin from harmful, ultraviolet rays. - Standard Fit is generous, so it fits close to the body without being constricting.

When the mercury drops, reach for the Power Grid Short Sleeve Baselayer. It'll add some extra warmth for your core, but still be plenty breathable—avoiding the dreadful clamminess that can come with warm base layers. - 4-way stretch fabrication allows for easy layering under any kit. - Fabric Content: 91% Polyester, 9% Spandex Knit.

When tubeless performance on race day is mandatory but durability for rough roads all season is just as important the S-Works 2BR delivers—from cobbled classics to your daily lunch ride. Our all-new Gripton T2 compound is the fastest, most efficient compound we’ve ever created. We’ve combined this with the legendary grip of our Gripton T5 compound on the shoulders to the Turbo 2BR more grip, speed, and durability than ever before—six watts faster vs the previous 2BR and just 260 grams for a 26mm tire. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 26mm, psi 70-110, approximate weight 260g - 700 x 28mm, psi 70-95, approximate weight 280g - 700 x 30mm, psi 65-90, approximate weight 300g

We're not afraid to say that our GRIPTON compound is the best out there. And when combined with an ultra-supple 320 TPI cotton casing, you get a tire that's very special—you get the Turbo Cotton tire. Both materials stand for master craftsmanship, and they work in harmony to reflect our dedication to building the world's fastest tires. By bringing both of these materials together, we've created the best clincher tire out there. It provides a clear-cut performance advantage. - Casing: 320 TPI Polycotton - Bead: Foldable - Compound: GRIPTON - Flat Protection: BlackBelt - 700 x 24mm, psi 115-125, approximate weight 220g - 700 x 26mm, psi 95-115, approximate weight 240g - 700 x 28mm, Hell of the North, psi 85-95, approximate weight 260g

When the mercury drops, reach for the Power Grid Short Sleeve Baselayer. It'll add some extra warmth for your core, but still be plenty breathable—avoiding the dreadful clamminess that can come with warm base layers. - 4-way stretch fabrication allows for easy layering under any kit. - Fabric Content: 91% Polyester, 9% Spandex Knit.

Whether it‚ a picnic in the park or an epic, multi-day ride in the mountains, we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-liter open pannier in rigid plastic, our Coolcave is perfect for carrying everyday essentials, purchases, or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable Isofix mountings allow for secure attachment on most bike racks. - 19 L cargo capacity. - KlickFix mounting system. - Made with 50% recycled plastic. - Cargo net included. - Compatible with Specialized/Fjällräven Cave Pack, Cave Pack Tote, and Cave Lid Pack.

The Merino Seamless Short Sleeve Base Layer is the holy grail of base layers. As cozy as your favorite pair of wool slippers, yet it transfers moisture like water going through osmosis. It's the perfect recipe for a cool-weather layer courtesy of its Merino and synthetic fabrics. The science behind it is pretty simple. The synthetic yarns pull moisture away from the skin and distributes it across a large surface area where it can be rapidly evaporated. So when you think about it, no moisture buildup means that you won't experience any clammy chills as a result of dramatic temperature swings, and your skin, jersey, and jacket are going to remain dry in order to leave you comfortable. So, when you need to remain consistently warm on chilly days, look no further than this cool weather staple. - Merino and synthetic yarns are blended to create a soft, insulating, and moisture-wicking layer, while also retaining a compressive feel. - Targeted stretch and support areas are built-in, ensuring it moves with your body while you're riding. - Seamless construction provides the best fit and eliminates chafing. - Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit.

Calling the S-Works Mondo just an endurance tire is an insult. We believe it’s the fastest piece of endurance engineering on earth. Delivering everything riders demand from a class-leading endurance tire — long miles durability, all-weather traction, incredible puncture protection — and amplifying it with the performance riders want, like best-in-class efficiency and light weight, the S-Works Mondo tubeless tire is the fastest endurance tire ever. 11% more efficient and 5% lighter than any other endurance tire on the road*, it’s our go-anywhere, do-anything, optimum combination of speed and durability. Available in 28, 32, and 35 mm widths, you’ll be ready for anything the road ahead throws at you. The World Was Made For Mondo. *When measured in a lab setting S-Works Mondo showed the lowest rolling resistance numbers and lowest weight of any competitor in its class. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON® T2/T5 - Flat Protection: GRID RACE and BlackBelt - 700 x 28mm, psi 70-95, approximate weight 310g - 700 x 32mm, psi 50-80, approximate weight 330g - 700 x 35mm, psi 50-80, approximate weight 360g

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush Comp—a lightweight, extended coverage helmet at a wallet-friendly price. Starting with protection, the Ambush Comp boasts a significant amount of extended coverage and a single density foam that's been reinforced by a Composite Matrix. The reason behind this is that it manages the energy from impacts more effectively. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. And with its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly fine-tuning. The Ambush Comp also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush Comp well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Composite Matrix internal reinforcement allows large vents for greater cooling. - In-molded shell improves strength and reduces weight. - Mindset 360 fit system provides a secure, comfortable fit with 360-degree tension adjustment, five height positions, and integrated dial for easy on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling system optimizes ventilation. - Extended coverage for added protection and durability. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.